Low--CCM7.5 S2 Front Grille Off Render.jpg
Low--CCM7.5 S2 Front Grille On Render_0.jpg
Low--CCM7.5 S2 Front Grille Off Render.jpg
Low--CCM7.5 S2 Front Grille On Render_0.jpg

Bowers & Wilkins CCM7.5 S2

£850.00

Designed for down-firing, in-ceiling use, CCM7.5 S2 can be used as the left, centre, right and rear-channel rear speakers in a discreet home cinema system. Its configuration includes a 25mm (1in) Carbon Dome tweeter and a 180mm (7in) Continuum cone mid/ bass cone angled to the mounting surface, allowing for easy direction of the whole array towards the listener to ensure they hear the correct balance of sound. That way, dialogue is crystal clear and special effects come across accurately.

Thanks to Bowers & Wilkins unique QuickDogsTM fixing method, installation is simple and if preferred, the supplied round grille can be replaced with an optional, square grille.

*Sold As A Single Speaker

Add To Cart

Designed for down-firing, in-ceiling use, CCM7.5 S2 can be used as the left, centre, right and rear-channel rear speakers in a discreet home cinema system. Its configuration includes a 25mm (1in) Carbon Dome tweeter and a 180mm (7in) Continuum cone mid/ bass cone angled to the mounting surface, allowing for easy direction of the whole array towards the listener to ensure they hear the correct balance of sound. That way, dialogue is crystal clear and special effects come across accurately.

Thanks to Bowers & Wilkins unique QuickDogsTM fixing method, installation is simple and if preferred, the supplied round grille can be replaced with an optional, square grille.

*Sold As A Single Speaker

Designed for down-firing, in-ceiling use, CCM7.5 S2 can be used as the left, centre, right and rear-channel rear speakers in a discreet home cinema system. Its configuration includes a 25mm (1in) Carbon Dome tweeter and a 180mm (7in) Continuum cone mid/ bass cone angled to the mounting surface, allowing for easy direction of the whole array towards the listener to ensure they hear the correct balance of sound. That way, dialogue is crystal clear and special effects come across accurately.

Thanks to Bowers & Wilkins unique QuickDogsTM fixing method, installation is simple and if preferred, the supplied round grille can be replaced with an optional, square grille.

*Sold As A Single Speaker

TECHNICAL INFORMATIOM

Drive units  

  • 1x ø25mm (1in) Carbon Dome high-frequency

  • 1x ø180mm (7in) Continuum cone mid/bass

 Frequency Range(-6dB)

  • -6dB at 25Hz - 33kHz 

Frequency Response -3dB

  • 32Hz - 28kHz ±3dB 

Sensitivity 

  • 90dB spl (2.83Vrms, 1m) 

Harmonic Distortion

  •  2nd and 3rd harmonics (90dB, 1m)

  • <1% 70Hz - 33kHz

  • <0.5% 100Hz - 28kHz

Nominal impedance

  • 8Ω (minimum 4.8Ω)

Recommended Amplifier Power

  • 25W - 150W into 8Ω on unclipped programme

Frame Diameter

  • 290mm (11.4in)

Depth

  • (behind surface) 128mm (5in)

Cut-out Diameter 

  • 254mm (10in)

Protrusion

  • 8.5mm (0.33in)

Net Weight

  • 3.1kg (6.83 lb)