Image 1 of 10
Image 2 of 10
Image 3 of 10
Image 4 of 10
Image 5 of 10
Image 6 of 10
Image 7 of 10
Image 8 of 10
Image 9 of 10
Image 10 of 10
Ex-Demo Spendor D7.2 Floorstanding Speakers
Spendor D7.2 Floorstanding Loudspeakers Ex-Demo Pair – Walnut
Lightly used in our demo room only, these are in excellent cosmetic and working condition and come complete with magnetic grilles and plinths fitted. Hand-built in the UK, the D7.2 is a 2.5-way design featuring Spendor's LPZ tweeter, EP77 polymer mid/bass driver and Kevlar composite bass unit in a rigid, asymmetrically braced cabinet with the fifth-generation linear-flow port. Easy to drive, unfussy about placement, and widely praised for its clarity, agility and natural, fatigue-free balance.
Key details
Genuine ex-demo pair demo room use only
Finish: Walnut real wood veneer (standard finish)
Excellent condition – cabinets, veneer and drive units all clean and unmarked (see photos)
Magnetic grilles included – no fixing holes on the baffle
Made in England by Spendor Audio Systems
Original packaging
Collection only
Type: 2.5-way floorstanding loudspeaker
Enclosure: rigid, asymmetric braced, vented cabinet with Spendor Dynamic Damping
Port: fifth-generation Spendor linear-flow tapered twin-venturi
HF driver: Spendor 22mm LPZ polyamide dome
Bass/mid driver: Spendor 18cm EP77 polymer cone
Lower bass driver: Spendor 18cm Kevlar composite cone
Crossover frequencies: 900Hz, 3.2kHz
Typical in-room response: 29Hz – 25kHz
Sensitivity: 90dB for 1 watt at 1 metre
Nominal impedance: 8 ohms
Power handling: 200 watts unclipped programme
Input: single pair recessed precision binding posts
Height: 950mm (excluding spikes)
Width: 192mm cabinet / 204mm plinth
Depth: 320mm cabinet / 344mm plinth
Net weight: 21kg each
Spendor D7.2 Floorstanding Loudspeakers Ex-Demo Pair – Walnut
Lightly used in our demo room only, these are in excellent cosmetic and working condition and come complete with magnetic grilles and plinths fitted. Hand-built in the UK, the D7.2 is a 2.5-way design featuring Spendor's LPZ tweeter, EP77 polymer mid/bass driver and Kevlar composite bass unit in a rigid, asymmetrically braced cabinet with the fifth-generation linear-flow port. Easy to drive, unfussy about placement, and widely praised for its clarity, agility and natural, fatigue-free balance.
Key details
Genuine ex-demo pair demo room use only
Finish: Walnut real wood veneer (standard finish)
Excellent condition – cabinets, veneer and drive units all clean and unmarked (see photos)
Magnetic grilles included – no fixing holes on the baffle
Made in England by Spendor Audio Systems
Original packaging
Collection only
Type: 2.5-way floorstanding loudspeaker
Enclosure: rigid, asymmetric braced, vented cabinet with Spendor Dynamic Damping
Port: fifth-generation Spendor linear-flow tapered twin-venturi
HF driver: Spendor 22mm LPZ polyamide dome
Bass/mid driver: Spendor 18cm EP77 polymer cone
Lower bass driver: Spendor 18cm Kevlar composite cone
Crossover frequencies: 900Hz, 3.2kHz
Typical in-room response: 29Hz – 25kHz
Sensitivity: 90dB for 1 watt at 1 metre
Nominal impedance: 8 ohms
Power handling: 200 watts unclipped programme
Input: single pair recessed precision binding posts
Height: 950mm (excluding spikes)
Width: 192mm cabinet / 204mm plinth
Depth: 320mm cabinet / 344mm plinth
Net weight: 21kg each