ATC SCM50 ASL Cherry
ATC SCM 50 ASL Rear
ATC SCM50 ASL Side
ATC SCM50 ASL Pippy Oak
ATC SCM50 ASL Burr Poplar
ATC SCM50 ASL Burr Magnolia
ATC SCM50 ASL Satin Black
ATC SCM50 ASL Satin White
ATC SCM50 ASL Black Ash
ATC SCM50 ASL Oak
ATC SCM50 ASL Walnut
ATC SCM50 ASL Euro Walnut
ATC SCM50 ASL Rosewood
ATC SCM50 ASL Cherry
ATC SCM 50 ASL Rear
ATC SCM50 ASL Side
ATC SCM50 ASL Pippy Oak
ATC SCM50 ASL Burr Poplar
ATC SCM50 ASL Burr Magnolia
ATC SCM50 ASL Satin Black
ATC SCM50 ASL Satin White
ATC SCM50 ASL Black Ash
ATC SCM50 ASL Oak
ATC SCM50 ASL Walnut
ATC SCM50 ASL Euro Walnut
ATC SCM50 ASL Rosewood

ATC SCM50 ASL Active

from £16,650.00

The ATC SCM50 ASL active are designed to perform at their best in the recording studio or at home with the finest quality hi-fi equipment.

The monitors’ ability to reproduce music and speech with phenomenal accuracy, transparency and dynamics lies mainly in the SM75-150S soft dome midrange driver. However, recent modifications that include the new ATC SH25-76S tweeter and enhanced port profile have brought about further improvements to all performance parameters.

Each drive unit in the active model has its own dedicated and individually matched MOS-FET amplifier, while the 234mm/9″ bass driver incorporates ATC’s unique Super Linear Magnet technology. ATCs active crossover network consists of a wide band-width, electronically balanced input stage with high common mode rejection and very low distortion.

Like the HF, mid and bass drivers, all electronics are designed and manufactured in-house to create a no-compromise active system.

Speakers are supplied with stands and fabric wrapped grills.

*In Store Only

Finish:

The ATC SCM50 ASL active are designed to perform at their best in the recording studio or at home with the finest quality hi-fi equipment.

The monitors’ ability to reproduce music and speech with phenomenal accuracy, transparency and dynamics lies mainly in the SM75-150S soft dome midrange driver. However, recent modifications that include the new ATC SH25-76S tweeter and enhanced port profile have brought about further improvements to all performance parameters.

Each drive unit in the active model has its own dedicated and individually matched MOS-FET amplifier, while the 234mm/9″ bass driver incorporates ATC’s unique Super Linear Magnet technology. ATCs active crossover network consists of a wide band-width, electronically balanced input stage with high common mode rejection and very low distortion.

Like the HF, mid and bass drivers, all electronics are designed and manufactured in-house to create a no-compromise active system.

Speakers are supplied with stands and fabric wrapped grills.

*In Store Only

Technical Information

Drivers

HF 25mm Mid 75mm LF 234mm Super Linear

Amplitude Linearity ±2dB

70Hz – 20kHz

Frequency Response -6dB

38Hz & 25kHz

Matched Response

±0.5dB

Dispersion

±80° Coherent Horizontal ±10° Coherent Vertical

Max continuous SPL @1m

112dB SPL

Crossover Frequency

380Hz & 3.5kHz

Input Connector

XLR

Input Sensitivity

1V

Input Impedance

>10k ohms balanced XLR

Amplifier Output

HF 50 Watts RMS MF 100 Watts RMS LF 200 Watts RMS

Overload Protection

Active FET momentary gain reduction (amplifiers)

Power Requirements

Voltage: 100, 115, 230 (factory set)
Frequency: 50/60Hz
Power: Nominal 90 Watts, Driven 350 Watts

Accessories Inc. (per pair)

2 x Speaker Stands (as shown), 2 x fabric wrapped grills, 8 x M8 x 1.25mm stand spikes and nuts.

Cabinet Dimensions(HxWxD)

717 x 304 x 480mm / 28.23 x 11.97 x 18.89″ including amps (stands add 250mm to height)

Weight

48.9kg